2022-2024年式 スバル WRX カーボン ダックビル V2 スポイラー

I love how the finish is and was easy application!Would buy again!Thank you,

Only 2 of the holes matches up with the plastic screws provided but with the tape it’s still on there well looks good

Looks and fits amazing

First off you can see where they ground on the seam of the carbon fiber and didn't clean it properly before clear coating it, so it's discolored. Second the clear is so thin in areas to where you can still see the weave. Third the fitment leaves a little to be desired, especially on the corners. In places three layers of 3M tape are required to eliminate gaps. Also they put the effort into putting threaded plugs in the wing. It wouldn't have taken much more effort to make them line up with one or two of the factory holes in the trunk. Make sure to remove the plugs on it to allow to fit. And make sure to plug the factory wing mount holes or you'll end up with a wet trunk

First off you can see where they ground on the seam of the carbon fiber and didn't clean it properly before clear coating it, so it's discolored. Second the clear is so thin in areas to where you can still see the weave. Third the fitment leaves a little to be desired, especially on the corners. In places three layers of 3M tape are required to eliminate gaps. Also they put the effort into putting threaded plugs in the wing. It wouldn't have taken much more effort to make them line up with one or two of the factory holes in the trunk. Make sure to remove the plugs on it to allow to fit. And make sure to plug the factory wing mount holes or you'll end up with a wet trunk